Admin Guide

Variable Value
<file> Specifies the name of the license file when copied to the flash. The
destination file name must meet the following requirements:
• Maximum of 63 alphanumeric characters
• No spaces or special characters allowed
• Underscore (_) is allowed
• The file extension ".xml" is required
<srcfile> Specifies the name of the license file on the TFTP server. For
example, license.lic or license.xml.
Showing a license file
About this task
Display the existing software licenses on your device.
Procedure
1. Log on to the switch to enter User EXEC mode.
2. Show the existing software licenses on your device:
show license
Example
For no license:
Switch:1>show license
No license file is loaded.
Basic feature set is available without license.
************************************************************************
Features requiring a Premier license:
- Layer 3 VSNs
- MACsec
For a Premier with MACsec license:
Switch:1>show license
License file name : /intflash/premier_macsec.xml
l
License Type : PREMIER+MACSEC
MD5 of Key : 00000000 00000000 00000000 00000000
MD5 of File : 00000000 00000000 00000000 00000000
Generation Time : 2015/2/26 11:09:53
Expiration Time :
Base Mac Addr : b0:ad:aa:46:f0:00
flags : 0x00000001 SINGLE
memo :
************************************************************************
Features requiring a Premier license:
Licensing
October 2015 Administering Avaya VSP 7200 Series and 8000 Series 124
Comments on this document? [e-mail]