Admin Guide

Editing serial port parameters
About this task
Perform this procedure to specify serial port communication settings. The serial port on the device is
the console port (10101).
Procedure
1. In the Device Physical View tab, select the console port (10101) on the device.
2. In the navigation tree, open the following folders: Configuration > Edit.
3. Click Serial Port.
4. Edit the port parameters as required.
Serial Port field descriptions
Use the data in the following table to use the Serial Port tab.
Name Description
IfIndex Specifies the slot and port number for the serial port.
BaudRate Specifies the baud rate of this port. The default is 9600.
DataBits Specifies the number of data bits, for each byte of data, this port sends and
receives. The default is 7.
Enabling port lock
About this task
Use the port lock feature to administratively lock a port or ports to prevent other users from changing
port parameters or modifying port action. You cannot modify locked ports until you first unlock the
port.
Procedure
1. In the navigation tree, open the following folders: Configuration > Security > Control Path.
2. Click General.
3. Click the Port Lock tab.
4. To enable port lock, select the Enable check box.
5. Click Apply.
Port Lock field descriptions
Use the data in the following table to use the Port Lock tab.
Chassis operations configuration using EDM
October 2015 Administering Avaya VSP 7200 Series and 8000 Series 103
Comments on this document? [e-mail]