Admin Guide

Note:
Enabling or disabling channelization resets the port QoS configuration to default values. For
information about configuring QoS values, see Configuring QoS and ACL-Based Traffic Filtering
on Avaya Virtual Services Platform 7200 Series and 8000 Series, NN47227-502.
Procedure
1. In the Device Physical View tab, select a 40 Gbps port.
2. In the navigation pane, expand the following folders: Configuration > Edit > Port.
3. Click General.
4. Click the Channelization tab.
5. To enable channelization on the port, select the enable button.
6. Click the Apply button. Alternatively, you can rignt-click on the port on the physical view, and
select Channelization Enable.
7. To disable channelization on a port, select the first sub-port for the corresponding port: slot/
port/1.
8. In the navigation tree, expand the following folders: Configuration > Edit > Port.
9. Click General.
10. Click the Channelization tab.
11. To disable channelization on the port, select the disable button. This action will disable the
four sub-ports.
12. Click the Apply button. Alternatively, you can rignt-click on the port on the physical view, and
select Channelization Disable.
Channelization field descriptions
Use the data in the following table to use the Channelization tab.
Name
Description
Channelization This field determines whether channelization is enabled or disabled on the
selected port. The two options are enable and disable. The default is
disable.
Configuring basic port parameters
About this task
Configure options for a basic port configuration.
When you use 1 Gigabit Ethernet SFP transceivers on VSP 7254XSQ, the software disables auto-
negotiation on the port:
• If you use 1 Gbps fiber SFP transceivers, the remote end must also have auto-negotiation
disabled.
Chassis operations
January 2017 Administering Avaya VSP 7200 Series and 8000 Series 90
Comments on this document? [e-mail]