Admin Guide

If you make a change to the switch, it appears under the specific configuration heading. The
following example shows a subset of the output of this command.
Switch:1#show running-config
Preparing to Display Configuration...
#
# Sun Jan 04 14:04:23 1970 UTC
# box type : VSP-8284XSQ
# software version : vsp8k_4.0_B017 (PRIVATE)
# cli mode : ACLI #
--More-- (q = quit)
Note:
The output from the show running-config command displays an "end statement" near the
end of the config file. This statement means that the script is exiting the Global
Configuration mode and loading the rest of the configuration in Privileged EXEC mode, which is
a requirement when loading the IP redistribution commands.
If you add
verbose to the show running-config command, the output contains current switch
configuration including software (versions), performance, VLANs (numbers, port members), ports
(type, status), routes, memory, interface, and log and trace files. With the verbose command, you
can view the current configuration and default values.
CLI settings
Use the show cli info command to display information about the ACLI configuration. The syntax
for this command is as follows.
show cli info
The following example shows sample output from the show cli info command.
Switch:1#show cli info
cli configuration
ore : true
screen-lines : 23
telnet-sessions : 8
rlogin-sessions : 8
timeout : 900 seconds
monitor duration: 300 seconds
monitor interval: 5 seconds
use default login prompt : true
default login prompt : Login:
custom login prompt : Login:
use default password prompt : true
default password prompt : Password:
custom password prompt : Password:
prompt : Switch
ACLI show command reference
January 2017 Administering Avaya VSP 7200 Series and 8000 Series 220
Comments on this document? [e-mail]