Admin Guide

6. Save the configuration:
save config
Note:
The save config command saves the configuration file with the filename configured
as the primary configuration filename in boot config. Use the command show boot
config choice to view the current primary and backup configuration filenames.
Example
Configure the pre- and post-notification rules to the default:
Switch:1>enable
Switch:1#configure terminal
Switch:1(config)#default password pre-expiry-notification-interval
Switch:1(config)#default password post-expiry-notification-interval
Switch:1(config)#save config
Variable definitions
Use the data in the following table to use the pre-expiry-notification-interval command.
Variable Value
<1–99> <1–99> <1–99> Configure the pre-notification intervals to provide
messages to warn the users that their passwords will
expire within a particular timeframe.
The first <1–99> variable specifies the first
notification, the second <1–99> specifies the second
notification, and the third <1–99> variable specifies
the third interval.
By default, the first interval is 30 days, the second
interval is 7 days, and the third interval is 1 day.
Use the data in the following table to use the
post-expiry-notification-interval
command.
Variable
Value
<1–99> <1–99> <1–99> Configure the post-notification intervals to provide
notification to the users that their passwords have
expired within a particular timeframe.
The first <1–99> variable specifies the first
notification, the second <1–99> specifies the second
notification, and the third <1–99> variable specifies
the third interval.
By default, the first interval is 1 day, the second
interval is 7 days, and the third interval is 30 days.
System access
January 2017 Administering Avaya VSP 7200 Series and 8000 Series 210
Comments on this document? [e-mail]