Admin Guide

Name Description
IfIndex Specifies the slot and port number for the serial port.
BaudRate Specifies the baud rate of this port. The default is 9600.
DataBits Specifies the number of data bits, for each byte of data, this port sends and
receives. The default is 7.
Enabling port lock
About this task
Use the port lock feature to administratively lock a port or ports to prevent other users from changing
port parameters or modifying port action. You cannot modify locked ports until you first unlock the
port.
Procedure
1. In the navigation tree, open the following folders: Configuration > Security > Control Path.
2. Click General.
3. Click the Port Lock tab.
4. To enable port lock, select the Enable check box.
5. Click Apply.
Port Lock field descriptions
Use the data in the following table to use the Port Lock tab.
Name
Description
Enable Activates the port lock feature. Clear this check box to unlock
ports. The default is disabled.
LockedPorts Lists the locked ports. Click the ellipsis (...) button to select the
ports you want to lock or unlock.
Locking a port
Before you begin
• You must enable port lock before you lock or unlock a port.
About this task
Use the port lock feature to administratively lock a port or ports to prevent other users from changing
port parameters or modifying port action. You cannot modify locked ports until you first unlock the
port.
Chassis operations
January 2017 Administering Avaya VSP 7200 Series and 8000 Series 108
Comments on this document? [e-mail]