Installation Instructions
Table Of Contents
- Contents
- Chapter 1: Introduction
- Chapter 2: New in this document
- Chapter 3: Safety and equipment care information
- Chapter 4: Supported transceiver, BOCs, and DACs information
- Chapter 5: Optical routing design
- Chapter 6: SFP
- Chapter 7: SFP+
- SFP+ transceivers
- SFP+ specifications
- SFP+ labels
- General SFP+ specifications
- Supported SFP+ transceivers
- 10GBASE-T SFP+ transceiver
- 10GBASE-LR/LW SFP+ specifications
- 10GBASE-LR/LW SFP+ high temperature (-5 °C to +85 °C) specifications
- 10GBASE-ER/EW SFP+ specifications
- 10GBASE-SR/SW SFP+ specifications
- 10GBASE-SR/SW SFP+ high temperature (0 °C to +85 °C) specifications
- 10GBASE-ZR/ZW SFP+ specifications
- 10GBASE-CX specifications
- 10GBASE CWDM DDI SFP+ (40 km) specifications
- 10GBASE-LRM SFP+ specifications
- 10GBASE CWDM DDI SFP+ (70 km) specifications
- 10GBASE-BX SFP+ specifications
- Chapter 8: QSFP+
- Chapter 9: End of sale transceivers and cables
- Chapter 10: Translations of safety messages
- Class A electromagnetic interference warning statement
- Electrostatic discharge warning statement
- Laser eye safety danger statement
- Laser eye safety connector inspection danger statement
- Connector cleaning safety danger statement
- Optical fiber damage warning statement
- Optical fiber connector damage warning statement
- SFP damage warning statement
- Chapter 11: Resources
- Glossary
Chapter 1: Introduction
Purpose
This document provides installation instructions and technical specifications for the following:
• Small Form Factor Pluggable (SFP)
• Small Form Factor Pluggable plus (SFP+)
• Quad Small Form Factor Pluggable plus (QSFP+)
VOSS runs on the following product familes:
• Avaya Virtual Services Platform 4000 Series
• Avaya Virtual Services Platform 7200 Series
• Avaya Virtual Services Platform 8000 Series
Not all products support all cable lengths, or all SFP, SFP+, or QSFP+ transceivers.
Note:
The VSP 4000 does not support 40 Gbps QSFP+ transceivers because the VSP 4000 devices
do not have any QSFP+ ports. However, the VSP 4000 series supports the four SFP+ 10-
gigabit ends of the Direct Attach Breakout Cable (BOC) assembly.
January 2018 Installing Transceivers and Optical Components on VOSS 6
Comments on this document? infodev@avaya.com