Installation Instructions

Model Description Minimum software version Part number
VSP
4000
VSP
7200
VSP 8200 VSP
8400
5 °C to +85 °C)
SFP+
10GBASE-
ER/EW SFP+
40 km, 1550 nm
SMF
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1403013–E6
10GBASE-
ZR/ZW SFP+
70 km, 1550 nm
SMF
3.0.0.0 N/A *
Substitut
e with
10GBAS
E-ZR
CWDM
DDI SFP
+
(AA1403
165-E6)
4.0.0 4.2.0 AA1403016–E6
10GBASE-LRM
SFP+
220 m, 1260 to
1355 nm; 1310
nm nominal MMF
3.0.0.0 N/A * 4.0.0 4.2.0 AA1403017–E6
VSP 7200 Series:
* VSP 7254XSQ has a PHYless design which is typical for Data Center Top of Rack switches. The benefits
of a PHYless design are lower power consumption and lower latency. However, due to the PHYless design,
this transceiver is N/A.
10GBASE
CWDM DDI SFP
+ (40 km)
40 km, 1471 to
1611 nm
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1403153–E6 to
AA1403160–E6
10GBASE
CWDM DDI SFP
+ (70 km)
70 km, 1471 to
1611 nm
4.0.50.0 4.2.1 4.0.0 4.2.0 AA1403161–E6 to
AA1403168–E6
10GBASE-BX10
SFP+
10 km 4.2.1 4.2.1 4.2.1 4.2.1 AA1403169–E6 and
AA1403170–E6
Supported QSFP+ transceivers
The following table provides a list of the supported QSFP+ transceivers, which includes the reach
provided by each QSFP+ transceiver.
Note:
The Avaya VSP 4000 does not support 40 Gbps QSFP+ transceivers because the VSP 4000
devices do not have any QSFP+ ports. However, the VSP 4000 series supports the four SFP
+ 10 Gigabit ends of the direct attach breakout cable (BOC) assembly.
Supported transceiver, BOCs, and DACs information
January 2018 Installing Transceivers and Optical Components on VOSS 16
Comments on this document? [e-mail]