Installation Instructions

Parameter Specifications
Line rate (64B/66B code) 10.3125 Gbps ± 100 parts per million (ppm)
Center wavelength range 840 to 860 nanometers (nm), nominal 850 nm
Distance Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
• 400 MHz-km fiber: 2 to 66 m
• 500 MHz-km fiber: 2 to 82 m
• 2000 MHz-km fiber: 2 to 300 m
• 4700 MHz-km fiber (OM4): 2 to 400 m
Link optical power budget 7.3 dB
Maximum transmitter and dispersion penalty 3.9 dB at 300 m
Transmitter characteristics
Root-mean-square spectral width 0.05 to 0.40 nm
Launch power –7.3 to –1.0 dBm
Minimum extinction ratio 3.0 dB
Maximum optical return loss tolerance –12 dB
Receiver characteristics
Average receive power for BER 10
-12
–9.9 to –1.0 dBm
Receiver damage threshold 0 dBm
Maximum receiver sensitivity in OMA –11.1 dBm
Maximum receiver reflectance –12 dB
Stressed receiver sensitivity in OMA –7.5 dBm
10GBASE-SR/SW SFP+ high temperature (0 °C to +85 °C) specifications
The 10GBASE-SR/SW SFP+ high temperature transceiver (0 °C to +85 °C) provides 10 GbE
service at 850 nm.
The following table lists the specifications for the 10GBASE-SR/SW SFP+ transceiver (0 °C to +85
°C). The part number of this SFP+ transceiver is AA1403015-E6HT.
For more information about the 10GBASE-SR/SW SFP+ transceiver (0 °C to +85 °C), including test
and measurement information, see the IEEE 802.3ae standard.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
SFP+ specifications
May 2017 Installing Transceivers and Optical Components on VOSS 49
Comments on this document? [e-mail]