Installation Instructions

Parameter Specification
Maximum input power (maximum average receive
power)
–3.0 dBm
1000BASE-BX40 bidirectional SFP specifications
The 1000BASE-BX40 SFP transceivers (part numbers AA1419076-E6 and AA1419077-E6) can
attain a reach of up to 40 km. The minimum IL is 6 dB.
The following table describes standards, connectors, cabling, and distances for the 1000BASE-
BX40 SFP transceiver.
Table 14: 1000BASE-BX40 bidirectional SFP specifications
Parameter Specifications
Connectors Single-fiber LC
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Distance Up to 40 km with SMF
Wavelength 1310 nm and 1490 nm
Link optical power budget 20.0 dB
Maximum transmitter and dispersion power penalty 3.3 dB
Transmitter characteristics
Maximum launch power 3.0 dBm
Minimum launch power –3.0 dBm
Receiver characteristics
Maximum receiver sensitivity –23 dBm
Maximum input power (maximum average receive
power)
–3.0 dBm
100BASE-FX SFP specifications
The 100BASE-FX SFP provides 100 Mbps Ethernet Carrier Sense Multiple Access with Collision
Detection (CSMA-CD) connectivity using multimode optical fiber. The part number for this model is
AA1419074-E6.
This transceiver is supported in Avaya VSP 4850 SFP ports (47 and 48) and Avaya VSP 4450 SFP
ports (13 through 48). The 100BASE-FX SFP is not supported in 10 Gigabit SFP+ ports.
This transceiver is supported in Avaya VSP 8400 8424GS 24–port Gigabit Ethernet SFP ESM.
The following table describes the 100BASE-FX SFP specifications.
Table 15: 100BASE-FX SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.5 W
SFP specifications
May 2017 Installing Transceivers and Optical Components on VOSS 37
Comments on this document? [e-mail]