Installation Instructions

Parameter Specifications
Receiver sensitivity –17 dBm
Maximum receiver power 0 dBm
1000BASE-LX DDI SFP specifications
This SFP transceiver provides 1000BASE-LX Gigabit Ethernet connectivity at 1310 nanometers
(nm) using single mode or multimode optical fiber. The part number is AA1419049-E6.
Table 11: 1000BASE-LX DDI SFP specifications
Parameter Specifications
Maximum electrical power consumption 1.0 watt (W)
Connectors Duplex LC
Cabling • 50 micrometer (µm) multimode fiber (MMF)
• 62.5 µm multimode fiber
• 9 µm single mode fiber (SMF)
Distance • Up to 550 meters (m) using MMF
• Up to 10 kilometers (km) using SMF
Data rate 1.0 Gbps
Line rate (8B/10B code) 1.25 Gbps
Link optical power budget 9.5 dB
Transmitter characteristics
Launch power –9.5 to –3.0 dBm
Receiver characteristics
Receiver sensitivity –19.0 dBm
Maximum receiver power –3.0 dBm
1000BASE-BX bidirectional SFP transceivers
The 1000BASE-BX bidirectional DDI SFP transceivers provides Gigabit Ethernet connectivity over a
single fiber.
In the following figure, the transmit (Tx) and receive (Rx) paths share the same fiber by using two
different wavelengths. One model transmits at 1310 nm and receives at 1490 nm, while the mating
model transmits at 1490 nm and receives at 1310 nm. You can only connect a mating pair.
SFP specifications
May 2017 Installing Transceivers and Optical Components on VOSS 35
Comments on this document? [e-mail]