Installation Instructions

Model Description Minimum software version Part number
VSP
4000
VSP
7200
VSP 8200 VSP
8400
1000BASE-T
SFP
Gigabit Ethernet,
RJ–45 connector
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1419043–E6
1000BASE-SX
DDI SFP
850 nm, Gigabit
Ethernet, duplex
LC connector
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1419048–E6
1000BASE-LX
DDI SFP
1310 nm, Gigabit
Ethernet, duplex
LC connector
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1419049–E6
1000BASE-BX10
DDI SFP
1310 nm (tx) and
1490 nm (rx)
Gigabit Ethernet,
single-fiber LC
connector
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1419069–E6 (10
km at 1310 nm ) and
mating pair
AA1419070–E6 (10
km at 1490 nm)
100BASE-FX
SFP
1300 nm, 100
Mbps Ethernet,
multimode fiber,
duplex LC
connector
3.0.0.0 N/A N/A N/A AA1419074–E6
Supported SFP+ transceivers
The following table provides a list of the supported SFP+ transceivers, which includes the reach
provided by each SFP+ transceiver.
Table 2: SFP+ transceivers
Model
Description Minimum software version Part number
VSP
4000
VSP
7200
VSP 8200 VSP
8400
10GBASE-
SR/SW SFP+
400 m, 850 nm
MMF
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1403015–E6
10GBASE-
SR/SW high
temperature (0
°C to +85 °C)
SFP+
850 nm MMF 4.0.50.0 N/A N/A N/A AA1403015–E6HT
10GBASE-
LR/LW SFP+
10 km, 1310 nm
SMF
3.0.0.0 4.2.1 4.0.0 4.2.0 AA1403011–E6
10GBASE-
LR/LW high
temperature (–5
10 km SMF 4.0.50.0 N/A N/A N/A AA1403011–E6HT
Supported transceiver, BOCs, and DACs information
May 2017 Installing Transceivers and Optical Components on VOSS 16
Comments on this document? [e-mail]