Installation Instructions

Chapter 4: Supported transceiver, BOCs,
and DACs information
Supported transceivers
The following sections show supported SFP, SFP+, QSFP+, and QSFP28 transceivers for VOSS.
The tables display only transceivers that are currently supported and available in the price book.
Not all Avaya Ethernet switching and routing products support all the transceivers listed in this
section.
Important:
Avaya recommends using Avaya-branded SFP, SFP+, QSFP+, and QSFP28 transceivers as
they have been through extensive qualification and testing. Avaya will not be responsible for
issues related to non-Avaya branded transceivers.
Supported SFP transceivers
The following table provides a list of the supported SFP transceivers, which includes the reach
provided by each SFP transceiver.
Table 1: SFP transceivers
Model
Description Minimum software version Part number
VSP
4000
VSP
7200
VSP 8200 VSP
8400
Important:
Avaya supports SFP transceivers with the following part numbers: AA1419013–E5, AA1419014–E5,
AA1419015–E5, and AA1419025–E5 to AA1419040–E5. However, Avaya strongly recommends using
the newer DDI versions of these SFP transceivers.
100BASE-FX
SFP
1300 nm, 100
Mbps Ethernet,
multimode fiber,
duplex LC
connector
3.0.0.0 N/A N/A N/A AA1419074–E6
May 2017 Installing Transceivers and Optical Components on VOSS 15
Comments on this document? [e-mail]