Troubleshooting Guide

policer {slot/port[-slot/port][,...]}|rmon {slot/port[-slot/port]
[,...]}[history]|verbose {slot/port[-slot/port][,...]}>
Note:
This show interfaces gigabitEthernet statistics rmon command displays
information only if you previously configured rmon stats or rmon history.
6. Capture the output for the following command after you observe a problem with the device:
show interfaces gigabitEthernet error <collision|verbose> {slot/
port[-slot/port][,...]}
Example
VSP-4850GTSPWR+:1>enable
Capture the output for the following command after you observer a problem with the device:
VSP-4K-R1-BEB-5-HighTemp:1(config)#show running-config module cli
Preparing to Display Configuration...
#
# Tue Feb 10 13:21:12 2015 UTC
# box type : VSP-4450GTXHT-PWR+
# software version : 4.1.0.0
# cli mode : ACLI
#
config terminal
#
# CLI CONFIGURATION
#
cli timeout 65535
prompt "VSP-4K-R1-BEB-5-HighTemp"
password password-history 3
clilog enable
Capture the output for the following command after you observe a problem with the device:
VSP-4K-R1-BEB-5-HighTemp:1#show tech
Sys Info:
---------------
General Info :
SysDescr : VSP-4450GTXHT-PWR+ (4.1.0.0)
SysName : VSP-4K-R1-BEB-5-HighTemp
SysUpTime : 0 day(s), 00:25:41
SysContact : http://support.avaya.com/
SysLocation : 211 Mt. Airy Road,Basking Ridge,NJ 0792
Chassis Info:
Chassis : 4450GTXHT-PWR+
Serial# : SDNIV44P0009
H/W Revision : R0A
H/W Config : none
NumSlots : 1
NumPorts : 50
Using ACLI for troubleshooting
January 2017 Troubleshooting 97
Comments on this document? [e-mail]