Troubleshooting Guide

Configuring target table parameters
About this task
Configure the target table to configure the security parameters for SNMP. Configure the target table
to configure parameters such as SNMP version and security levels.
Procedure
1. In the navigation tree, expand the following folders: Configuration > Edit > SnmpV3.
2. Click Target Table.
3. Click the Target Params Table tab.
4. Click Insert.
5. In the Name box, type a target table name.
6. From the MPModel options, select an SNMP version.
7. From the Security Model options, select the security model.
8. In the SecurityName box, type readview or writeview.
9. From the SecurityLevel options, select the security level for the table.
10. Click Insert.
Target Params Table field descriptions
Use the data in the following table to use the Target Params Table tab.
Name
Description
Name Identifies the target table.
MPModel Specifies the message processing model to use to generate
messages: SNMPv1, SNMPv2c, or SNMPv3/USM.
SecurityModel Specifies the security model to use to generate messages:
SNMPv1, SNMPv2c, or USM. You can receive an
inconsistentValue error if you try to configure this variable to a
value for a security model that the implementation does not
support.
SecurityName Identifies the principal on whose behalf SNMP messages are
generated.
SecurityLevel Specifies the security level used to generate SNMP messages:
noAuthNoPriv, authNoPriv, or authPriv.
Configuring target table parameters
January 2017 Troubleshooting 75
Comments on this document? [e-mail]