Troubleshooting Guide

SysName: BEB1-7254XSQ
SysCap: rB / rB (Supported/Enabled)
PortDesc: Avaya Virtual Services Platform 7254XSQ - 40GbCR4-Channel Port
1/1/1
SysDescr: VSP-7254XSQ (5.0.0.0_GA)
-------------------------------------------------------------------------------
Sys capability: O-Other; R-Repeater; B-Bridge; W-WLAN accesspoint; r-Router;
T-Telephone; D-DOCSIS cable device; S-Station only.
Total neighbors: 1
Related links
Troubleshooting Fabric Attach on page 309
Variable definitions on page 316
Variable definitions
Use the data in the following table to use the show lldp neighbor command.
Variable Value
port {slot/port[/sub-port][-slot/port[/sub-port]][,...]} Identifies the slot and port in one of the following
formats: a single slot and port (slot/port), a range of
slots and ports (slot/port-slot/port), or a series of
slots and ports (slot/port,slot/port,slot/port). If your
platform supports channelization for 40 Gbps ports
and the port is channelized, you must also specify
the sub-port in the format slot/port/sub-port.
Displays LLDP neighbor information on the specified
port.
Related links
Displaying learned LLDP neighbors on page 314
Viewing Fabric Attach discovered elements
Use this procedure to view Fabric Attach discovered elements.
About this task
When FA is enabled on an FA Server switch, LLDP PDUs are exchanged between the FA Server
and FA Clients or FA Proxies. Standard LLDPs allow neighbors to be learned. With the help of
organizational-specific element discovery TLVs, the client or proxy recognizes that it has attached to
the FA Server. Only after the discovery handshake is complete, an FA Client or FA Proxy can
transmit I-SID-to-VLAN assignments to join the SPB Fabric network through the FA Server.
Procedure
1. Enter Privileged EXEC mode:
enable
2. Display FA discovered elements:
show fa elements
3. Display FA discovered elements on a specific port:
Troubleshooting Fabric Attach
January 2017 Troubleshooting 316
Comments on this document? [e-mail]