Troubleshooting Guide

3. Verify successful LLDP transmission on a port:
show lldp tx-stats port {slot/port[/sub-port] [-slot/port[/sub-
port]] [,...]}
4. Verify that the port is receiving LLDP PDUs successfully:
show lldp rx-stats port {slot/port[/sub-port] [-slot/port[/sub-
port]] [,...]}
5. (Optional) To clear LLDP statistics, enter one of the following commands:
• Clear LLDP global statistics using clear lldp stats summary
• Clear LLDP statistics on ports using clear lldp stats {slot/port[/sub-port]
[-slot/port[/sub-port]] [,...]}
Example
Verify LLDP transmission statistics on a port:
Switch:1>en
Switch:1#show lldp tx-stats port 1/2
================================================================
LLDP Tx-Stats
================================================================
PORT NUM FRAMES
----------------------------------------------------------------
1/2 100
Verify that the port is receiving LLDP PDUs,
Switch:1#show lldp rx-stats port 1/2
================================================================================
LLDP Rx-Stats
================================================================================
Port Frames Frames Frames TLVs TLVs AgeOuts
Num Discarded Errors Total Discarded Unsupported
(Non FA) (Non FA)
--------------------------------------------------------------------------------
1/2 0 0 46 0 0 0
Related links
Troubleshooting Fabric Attach on page 309
Variable definitions on page 313
Variable definitions
Use the data in the following table to use the show lldp tx-stats and the show lldp rx-
stats commands.
Variable Value
{slot/port[/sub-port][-slot/port[/sub-port]][,...]} Identifies the slot and port in one of the following
formats: a single slot and port (slot/port), a range of
slots and ports (slot/port-slot/port), or a series of
Troubleshooting Fabric Attach using the ACLI
January 2017 Troubleshooting 313
Comments on this document? [e-mail]