Troubleshooting Guide

Viewing multicast routes by egress VLAN
With the Egress VLANs tab, you can view the egress VLANs for the streams corresponding to the
selected entry in the Mroute-Hw table.
Procedure
1. In the navigation tree, expand the following folders: IP > Multicast.
2. Click the Mroute-HW tab.
3. Click any row in the table.
4. Click EgressVlans.
EgressVlans field descriptions
Use the information in the following table to help you use the EgressVlans tab.
Name Description
EgressVlan All the egress VLANs for the particular multicast
stream selected from the Mroute-HW table.
EgressVlanPorts The corresponding ports for the particular multicast
stream selected from the Mroute-HW table.
Enabling multicast routing process statistics
Enable the collection of multicast routing process statistics. The statistics display based on VRF and
multicast group classification. These statistics are not related to the interface (port) statistics. (To
display the collected statistics, you must use ACLI.)
Procedure
1. In the navigation tree, expand the following folders: Configuration > IP.
2. Click Multicast.
3. Click the Globals tab.
4. Select the MrouteStatsEnabled check box, and then click Apply.
Viewing multicast routes by egress VLAN
January 2017 Troubleshooting 295
Comments on this document? [e-mail]