Troubleshooting Guide

5. In the MA tab, click Insert.
6. In the fields provided, specify an index value and name for the MA.
7. Click Insert.
MA field descriptions
Use the data in the following table to use the MA tab.
Name Description
DomainIndex Specifies the maintenance domain entry index.
AssociationIndex Specifies a maintenance association entry index.
DomainName Specifies the MD name.
AssociationName Specifies the MA name.
NumOfMep Indicates the number of MEPs that belong to this
maintenance association.
Configuring CFM MEP
Use this procedure to configure the CFM Maintenance Endpoint (MEP). A MEP represents a
managed CFM entity, associated with a specific Domain Service Access Point (DoSAP) of a service
instance, which can generate and receive CFM Protocol Data Units (PDU) and track any responses.
A MEP is created by MEP ID under the context of an MA.
Procedure
1. In the navigation tree, expand the following folders: Configuration > Edit > Diagnostics.
2. Click CFM.
3. Click the MD tab.
4. Highlight an existing MD, and then click MaintenanceAssociation.
5. In the MA tab, highlight an existing MA, and then click MaintenanceEndpoint.
6. Click Insert.
7. In the fields provided, specify the ID and the administrative state of the MEP.
8. Click Insert.
MEP field descriptions
Use the data in the following table to use the MEP tab.
Name
Description
DomainIndex Specifies the MD index.
AssociationIndex Specifies the MA index.
Id Specifies the MEP ID.
DomainName Specifies the MD name.
Table continues…
CFM configuration using EDM
January 2017 Troubleshooting 189
Comments on this document? [e-mail]