Troubleshooting Guide

Name Description
MiscOptions Enables an application to specify implementation-dependent
options.
MaxFailures Indicates the maximum number of consecutive timeouts allowed
before terminating a remote traceroute request. The default is 5.
DontFragment Enables setting of the do not fragment (DF) flag in the IP header
for a probe. The default is disabled.
InitialTtl Specifies the initial time-to-live (TTL) value to use. The default is 1.
Frequency Specifies the number of seconds to wait before repeating a
traceroute test as defined by the value of the various objects in the
corresponding row. The default is 0.
StorageType Specifies the storage type for this row.
AdminStatus Specifies the desired state for TraceRouteCtlEntry. The options
are enabled or disabled. The default is disabled.
MaxRows Specifies the maximum number of entries allowed in the
TraceRouteProbeHistoryTable. The default is 50.
TrapGeneration Determines when to generate a notification for this entry. The
options are
• pathChange —Generates a TraceRoutePathChange notification
after the current path varies from a previously determined path.
• testFailure —Generates a TraceRouteTestFailed notification
after the full path to a target cannot be determined.
• testCompletion —Generates a TraceRouteTestCompleted
notification after the path to a target has been determined.
Descr Describes the remote traceroute test.
CreateHopsEntries Stores the current path for a traceroute test in the
TraceRouteHopsTable on an individual hop basis when the value
of this object is true. The default is false.
Type Reports or selects the implementation method to use for
performing a traceroute operation.
Viewing traceroute results
About this task
View traceroute results to view performance-related data.
Note:
In the current release, troubleshooting using ping and traceroute (including Layer 2 ping and
Layer 2 traceroute) is not supported on EDM. For more information, see Release Notes for VSP
Operating System Software, NN47227-401. As an alternative, use the ACLI.
Viewing traceroute results
January 2017 Troubleshooting 139
Comments on this document? [e-mail]