Troubleshooting Guide

5. In the OwnerIndex box, type the owner index.
6. In the TestName box, type the name of the test.
7. In the TargetAddress box, type the host IP address.
8. From the AdminStatus options, select enabled.
9. In the remainder of the option boxes, type the desired values.
10. Click Insert.
11. Select and entry, and then click Start.
Let the test run for several seconds.
12. Select an entry, and then click Stop.
13. View the Ping results.
Ping Control field descriptions
Use the data in the following table to use the Ping Control tab.
Name Description
OwnerIndex Provides access control by a security administrator using the View-
Based Access Control Model (VACM) for tables in which multiple
users need to independently create or modify entries. This is a
string of up to 32 characters.
TestName Specifies the name of the ping test.
TargetAddress Specifies the host address to use at a remote host to perform a
ping operation.
DataSize Specifies the size of the data portion (in octets) to transmit in a
ping operation. The default is 16.
TimeOut Specifies the timeout value, in seconds, for a remote ping
operation. The default is 3 seconds.
ProbeCount Specifies the number of times to perform a ping operation at a
remote host. The default is 1.
AdminStatus Specifies the state of the ping control entry: enabled or disabled.
The default is disabled.
DataFill Determines the data portion of a probe packet.
Frequency Specifies the number of seconds to wait before repeating a ping
test. The default is 0.
MaxRows Specifies the maximum number of entries allowed in the
PingProbeHistory table. The default is 50.
Table continues…
Software troubleshooting tool configuration using EDM
January 2017 Troubleshooting 134
Comments on this document? [e-mail]