Troubleshooting Guide

9. File: core.cbcp-main.x.20130220143809.1.tar
Size: 13969920 bytes
Created: Wed Feb 20 14:38:10 2013
10. File: core.cbcp-main.x.20130225155025.1.tar
Size: 13526016 bytes
Created: Mon Feb 25 15:50:25 2013
11. File: core.cbcp-main.x.20130225155407.1.tar
Size: 12674560 bytes
Created: Mon Feb 25 15:54:07 2013
Variable definitions
Use the data in the following table to use the show core-files command.
Variable Value
{slot[-slot][,...]} Displays the core files for the slot that you select.
Use the data in the following table to use the show debug-file command.
Variable Value
all Displays all types of debug files
{slot[-slot][,...]} Displays debug files for the slot that you select. If
you do not select a slot number, the device displays
all types of the archived debug files present in a slot
by slot basis. If you select a slot number, the device
only displays archived files for the slot you select.
Use the data in the following table to use the debug-file remove command.
Variable
Value
all Removes all types of debug files in all slots.
If you use the option all with the remove debug-
file command, then the device deletes all types of
debug files, including the latest debug files.
{slot[-slot][,...]} Removes debug files for the slot that you select.
When you clear archived files, if you do not select a
slot number, the device deletes all types of archived
debug files except the latest file in each slot.
Valid slots are 1–12, SF1–SF6, and all.
Configuring port mirroring
Before you begin
• You must log on to Global Configuration mode in ACLI.
Software troubleshooting tool configuration using ACLI
January 2017 Troubleshooting 110
Comments on this document? [e-mail]