Troubleshooting Guide

• wd_stats
If you want to delete a specific file, you must use the remove command. For more information, see
Commands Reference for Avaya Virtual Services Platform 4000 Series, NN46251-104.
Procedure
1. Log on to the switch to enter User EXEC mode.
2. View debug files:
show debug-file [all][{slot[-slot][,...]]
3. Delete debug files:
debug-file remove [all][{slot[-slot][,...]]
4. Enter Privileged EXEC mode:
enable
5. View core files:
show core-files {slot[-slot][,...]]
Example
The following example shows how you view all debug files for all slots, and then remove the debug
files for slot 1.
VSP-4850GTS>show debug-file
================================================================================
Core Files
================================================================================
Directory: /intflash/coreFiles/1
1. File: core.logServer.20120611084204.1.tar
Size: 60928 bytes
Created: Mon Jun 11 08:42:04 2012
2. File: core.trcServer.20120611084213.1.tar
Size: 60928 bytes
Created: Mon Jun 11 08:42:13 2012
3. File: core.logServer.20120611164647.1.tar
Size: 64000 bytes
Created: Mon Jun 11 16:46:48 2012
4. File: core.trcServer.20120611164652.1.tar
Size: 64000 bytes
Created: Mon Jun 11 16:46:52 2012
5. File: core.dbgServer.20120611164700.1.tar
Size: 64000 bytes
Created: Mon Jun 11 16:47:01 2012
6. File: core.logServer.20120611164740.1.tar
Size: 64000 bytes
Created: Mon Jun 11 16:47:41 2012
Remote CP Directory: /intflash/coreFiles/2
1. File: core.coreManager.x.20120612085548.2.tar
Size: 1162240 bytes
Created: Tue Jun 12 08:55:49 2012
2. File: core.coreManager.x.20120612085602.2.tar
Size: 478208 bytes
Created: Tue Jun 12 08:56:02 2012
3. File: core.coreManager.x.20120612085553.2.tar
Software troubleshooting tool configuration using ACLI
January 2017 Troubleshooting 106
Comments on this document? [e-mail]