Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Example
View IPv6 statistics on an interface:
Switch:1>enable
Switch:1#show ipv6 interface statistics
================================================================================
Interface Stats
================================================================================
If Stats for mgmt, IfIndex = 64
InReceives: 404
InHdrErrors: 0
InTooBigErrors : 0
InNoRoutes : 0
InAddrErrors : 0
InUnknownProtos : 0
InTruncatedPkts : 0
InDiscards : 0
InDelivers : 404
OutForwDatagrams : 0
OutRequests : 417
OutDiscards : 0
OutFragOKs : 0
OutFragFails : 0
OutFragCreates : 0
--More-- (q = quit)
Variable definitions
Use the data in the following table to use the show ipv6 interface statistics command
Variable Value
vlan <1-4059> Shows statistics for the specific interface index. If
you do not specify an interface index, the command
output includes all IPv6 interfaces.
Specifies the VLAN ID in the range of 1 to 4059.
VLAN IDs 1 to 4059 are configurable. The system
reserves VLAN IDs 4060 to 4094 for internal use.
VLAN ID 1 is the default VLAN and you cannot
create or delete VLAN ID 1.
Viewing IP VRRPv3 statistics
Use the following procedure to view IP VRRPv3 statistics to monitor network performance.
Procedure
1. Enter Privileged EXEC mode:
enable
2. Enter the following command to view VRRP statistics:
Statistics
January 2017 Performance Management on Avaya VSP 4000 Series 84
Comments on this document? [e-mail]