Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Variable definitions
Use the information in the following table to use the clear ipv6 statistics command.
Variable Value
vlan<1-4059> Specifies the VLAN ID in the range of 1 to 4059.
VLAN IDs 1 to 4059 are configurable. The system
reserves VLAN IDs 4060 to 4094 for internal use.
VLAN ID 1 is the default VLAN and you cannot
create or delete VLAN ID 1.
gigabitethernet {slot/port[/sub-port]} Identifies a single slot and port. If your platform
supports channelization for 40 Gbps ports and the
port is channelized, you must also specify the sub-
port in the format slot/port/sub-port.
Viewing IPv6 VRRP statistics
View IPv6 VRRP statistics to monitor network performance
Procedure
1. Log on to the switch to enter User EXEC mode.
2. View statistics for the device and for all interfaces:
show ipv6 vrrp statistics [link-local WORD<0–127>]] [vrid <1–255>]
Example
View IPv6 VRRP statistics for VRID 1.
Switch:1(config)#show ipv6 vrrp statistics vrid 1
=============================================================================
VRRP Interface Stats - GlobalRouter
=============================================================================
VRID P/V BECOME_MASTER ADVERTISE_RCV
-----------------------------------------------------------------------------
1 84 2 17372
1 85 2 17372
1 86 1 0
1 87 1 0
1 1001 2 17372
VRID P/V ADVERTISE_INT_ERR TTL_ERR PRIO_0_RCV
-----------------------------------------------------------------------------
1 84 0 0 0
1 85 0 0 0
1 86 0 0 0
1 87 0 0 0
1 1001 0 0 0
VRID P/V PRIO_0_SENT INVALID_TYPE_ERR ADDRESS_LIST_ERR UNKNOWN_AUTHTYPE
-----------------------------------------------------------------------------
--More-- (q = quit)
Viewing statistics using ACLI
January 2017 Performance Management on Avaya VSP 4000 Series 81
Comments on this document? [e-mail]