Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

IcmpInPktTooBigs : 0
IcmpInEchos : 0
IcmpInEchoReplies : 0
IcmpInRouterSolicits : 0
IcmpInRouterAdverts : 0
InNeighborSolicits : 0
InNbrAdverts : 0
IcmpInRedirects : 0
IcmpInGroupMembQueries : 0
IcmpInGroupMembResponses : 0
Variable definitions
Use the data in the following table to use the show ipv6 interface icmpstatistics
command
Variable Value
<1-4059> Shows ICMP statistics for the specific interface
index. If you do not specify an interface index, the
command output includes all IPv6 ICMP interfaces.
Specifies the VLAN ID in the range of 1 to 4059.
VLAN IDs 1 to 4059 are configurable. The system
reserves VLAN IDs 4060 to 4094 for internal use.
VLAN ID 1 is the default VLAN and you cannot
create or delete VLAN ID 1.
Clearing IPv6 statistics
Clear all IPv6 statistics if you do not require previous statistics.
Procedure
1. Enter Privileged EXEC mode:
enable
2. Clear all the IPv6 statistics:
clear ipv6 statistics all
3. Clear interface statistics:
clear ipv6 statistics interface [general|icmp] [gigabitethernet
<slot/port[/sub-port]>|mgmtethernet <slot/port[/sub-port]>|vlan
<1-4059>]
4. Clear TCP statistics:
clear ipv6 statistics tcp
5. Enter the following command to clear UDP statistics:
clear ipv6 statistics udp
Statistics
January 2017 Performance Management on Avaya VSP 4000 Series 80
Comments on this document? [e-mail]