Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Displaying IPsec statistics
Use the following procedure to display IPsec statistics.
Procedure
1. Enter Privileged EXEC mode:
enable
2. Display IPsec statistics on an Ethernet interface:
show ipsec statistics gigabitethernet {slot/port[/sub-port][slot/
port[/sub-port]][,...]}
3. Display the IPsec statistics on a VLAN interface:
show ipsec statistics vlan <1-4059>
4. Display the system global IPsec statistics:
show ipsec statistics system
5. Display IPsec statistics on a management interface:
show ipsec statistics mgmtethernet mgmt
6. Display IPsec statistics on a loopback interface:
show ipsec statistics loopback <1–256>
Example
Displaying IPsec statistics on an Ethernet interface:
Switch:1>enable
Switch:1#show ipsec statistics gigabitethernet 1/2
=======================================================================================
Ipsec Port Stats
=======================================================================================
Ifindex = 193
InSuccesses = 0
InSPViolations = 0
InNotEnoughMemories = 0
InAHESPReplays = 0
InESPReplays = 0
InAHFailures = 0
InESPFailures = 0
OutSuccesses = 0
OutSPViolations = 0
OutNotEnoughMemories = 0
generalError = 0
Displaying the IPsec statistics on a VLAN interface:
Switch:1>enable
Switch:1#show ipsec statistics vlan 2
=======================================================================================
Ipsec Vlan Stats
Statistics
January 2017 Performance Management on Avaya VSP 4000 Series 74
Comments on this document? [e-mail]