Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Viewing RMON statistics
About this task
View RMON statistics to manage network performance.
Procedure
View RMON statistics:
show rmon stats
Example
Switch:1(config)#show rmon stats
================================================================================
Rmon Ether Stats
================================================================================
INDEX PORT OWNER
--------------------------------------------------------------------------------
1 1/10 monitor
Job aid
The following table describes parameters in the output for the show rmon stats command.
Table 24: show rmon stats field descriptions
Parameter Description
Index An index that uniquely identifies an entry in the
Ethernet statistics table.
Port Identifies the source of the data that this entry
analyzes.
Owner The entity that configured this entry and is therefore
using the assign resources.
Displaying IPsec statistics
Use the following procedure to clear Internet Protocol Security (IPsec) system statistics counters
and display IPsec statistics on an interface. The device only clears system statistics counters on
system reboot.
The device only supports IPsec for IPv6 traffic, and an interface must support IPv6 to apply IPsec.
Procedure
1. Log on to the switch to enter User EXEC mode.
2. Display statistics for IPsec for the system:
Viewing statistics using ACLI
January 2017 Performance Management on Avaya VSP 4000 Series 67
Comments on this document? [e-mail]