Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Table 13: show filter acl statistics default field descriptions
Parameter Description
Acl ID Specifies the identifier for the ACL.
Acl Name Specifies the name for the ACL.
Acl Type Specifies the ACL type.
Acl Sec Packets Specifies the ACL secondary packets.
Acl Sec Bytes Specifies the ACL secondary bytes.
Acl QoS Packets Specifies the ACL QoS packets.
Acl QoS Bytes Specifies the ACL QoS bytes.
Viewing MSTP statistics
About this task
Display MSTP statistics to see MSTP related bridge-level statistics.
Procedure
Display the MSTP related bridge-level statistics:
show spanning-tree mstp statistics
Example
VSP-4850GTS#show spanning-tree mstp statistics
================================================================================
MSTP Bridge Statistics
================================================================================
Mstp UP Count : 1
Mstp Down Count : 0
Region Config Change Count : 12
Time since topology change : 8 day(s), 02H:54M:33S
Topology change count : 10
New Root Bridge Count : 25
Job aid
The following table describes the output for the show spanning-tree mstp statistics
command.
Table 14: show spanning-tree mstp statistics field descriptions
Parameter Description
MSTP Up Count The number of times the MSTP Module has been
enabled. A Trap is generated on the occurrence of
this event.
Table continues…
Viewing statistics using ACLI
January 2017 Performance Management on Avaya VSP 4000 Series 51
Comments on this document? [e-mail]