Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Port1/21 Level 1-2 0 1 0 0 0 0 0
VSP-4850GTS#show isis int-l1-cntl-pkts
================================================================================
ISIS L1 Control Packet counters
================================================================================
IFIDX DIRECTION HELLO LSP CSNP PSNP
--------------------------------------------------------------------------------
Mlt2 Transmitted 13346 231 2 229
Mlt2 Received 13329 230 1 230
Port1/21 Transmitted 13340 227 2 226
Port1/21 Received 13335 226 1 227
Variable definitions
Use the data in the following table to use the clear isis stats command.
Variable Value
error-counters Clears IS-IS stats error-counters.
packet-counters Clears IS-IS stats packet-counters.
Job aid
show isis statistics
The following table describes the fields in the output for the show isis statistics command.
Parameter
Description
LEVEL Shows the level of the IS-IS interface (Level 1 in the current release).
CORR LSPs Shows the number of corrupted LSPs detected.
AUTH FAILS Shows the number of times authentication has failed on the global level.
AREA DROP Shows the number of manual addresses dropped from the area.
MAX SEQ EXCEEDED Shows the number of attempts to exceed the maximum sequence number.
SEQ NUM SKIPS Shows the number of times the sequence number was skipped.
OWN LSP PURGE Shows how many times the local LSP was purged.
BAD ID LEN Shows the number of ID field length mismatches.
PART CHANGES Shows the number of partition link changes.
LSP DB OLOAD Show the number of times the Virtual Services Platform 4000 was in the
overload state.
show isis int-counters
The following table describes the fields in the output for the show isis int-counters
command.
Viewing statistics using ACLI
January 2017 Performance Management on Avaya VSP 4000 Series 47
Comments on this document? [e-mail]