Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Displaying RMON statistics for specific ports
Before you begin
• You must log on to at least the Privileged EXEC mode in ACLI.
About this task
Display individual RMON statistics for specific ports to manage network performance.
Procedure
View statistics for specific ports:
show interfaces GigabitEthernet statistics rmon {slot/port[-slot/port]
[,...]}
Example
View RMON statistics:
Switch:1>enable
Switch:1#show interfaces gigabitEthernet statistics rmon 1/13
================================================================================
Port Stats Rmon
================================================================================
PORT OCTETS PKTS MULTI BROAD CRC UNDER OVER FRAG COLLI
NUM CAST CAST ALLIGN SIZE SIZE MENT SION
--------------------------------------------------------------------------------
1/13 1943 21 8 13 0 0 0 0 0
Variable definitions
Use the data in the following table to use the show interfaces GigabitEthernet
statistics rmon command.
Variable Value
{slot/port[-slot/port][,...]} Identifies the slot and port in the following format: a
single slot and port/ports (1/1).
Job aid
The following table describes parameters for the show interfaces GigabitEthernet
statistics rmon command output.
Table 11: show interfaces GigabitEthernet statistics rmon field descriptions
Parameter Description
PORT NUM Indicates the port number.
OCTETS The total number of octets of data (including those in
bad packets) received on the network (excluding
framing bits but including FCS octets).
Table continues…
Viewing statistics using ACLI
January 2017 Performance Management on Avaya VSP 4000 Series 43
Comments on this document? [e-mail]