Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Example
View LACP statistics:
Switch:1>enable
Switch:1#show interfaces gigabitethernet statistics lacp
================================================================================
Port Stats Lacp
================================================================================
PORT TX RX TX RX TX RX RX RX
NUM LACPDU LACPDU MARKERPDU MARKERPDU MARKERRESPPDU MARKERRESPPDU UNKNOWN
ILLEGAL
--------------------------------------------------------------------------------
1/39 0 0 0 0 0 0 0 0
1/40 0 0 0 0 0 0 0 0
2/37 0 0 0 0 0 0 0 0
2/38 0 0 0 0 0 0 0 0
Variable definitions
Use the data in the following table to use the show interfaces GigabitEthernet
statistics lacp command.
Variable Value
{slot/port[-slot/port][,...]} Identifies the slot and port in the following format: a
single slot and port/ports (1/1).
Job aid
The following table describes parameters for the show interfaces GigabitEthernet
statistics lacp command.
Table 10: show interfaces GigabitEthernet statistics lacp field descriptions
Parameter Description
PORT_NUM Indicates the port number.
TX LACPDU The count of transmitted LACP data units.
RX LACPDU The count of received LACP data units.
TX MARKERPDU The count of transmitted marker protocol data units.
RX MARKERPDU The count of received marker protocol data units.
TX MARKERRESPPDU The count of transmitted marker protocol response
data units.
RX MARKERRESPPDU The count of received marker protocol response data
units.
RX UNKNOWN The count of received unknown frames.
RX ILLEGAL The count of received illegal frames.
Statistics
January 2017 Performance Management on Avaya VSP 4000 Series 42
Comments on this document? [e-mail]