Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Procedure
1. Log on to the switch to enter User EXEC mode.
2. View statistics:
show ipv6 dhcp-relay counters
Note:
Use the sys action reset counters command to clear DHCP Relay statistics.
Example
Switch:1#show ipv6 dhcp-relay counters
================================================================================
DHCPv6 Counters
================================================================================
INTERFACE REQUESTS REPLIES
--------------------------------------------------------------------------------
1111:0:0:0:0:0:0:1111 1 1
Job aid
The following table explains the output of the show ipv6 dhcp-relay counters command.
Table 9: show ipv6 dhcp-relay counters command output
Heading Description
REQUESTS Shows the number of DHCP and BootP requests on
this interface.
REPLIES Shows the number of DHCP and BootP replies on
this interface.
Displaying LACP statistics for specific ports
Before you begin
• You must log on to at least the Privileged EXEC mode in ACLI.
About this task
Display individual LACP statistics for specific ports to manage network performance.
Procedure
View statistics for specific ports:
show interfaces GigabitEthernet statistics lacp [{slot/port[-slot/port]
[,...]}]
Viewing statistics using ACLI
January 2017 Performance Management on Avaya VSP 4000 Series 41
Comments on this document? [e-mail]