Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Name Description
For the Avaya Virtual Services Platform 4000 Series, 1 to 25
sets the limit in a percentage of the total bandwidth on the port
from 1–25 percent.
On gigabit ports and MDAs, there can be up to a 2 percent
difference between the configured and actual rate limiting
values.
For the Avaya Virtual Services Platform 4000 Series, 1–65535
sets the limit in packets for each second.
Enable Double-click in the field and select to enable (True) or disable
(False) rate limiting. The default is false.
Enabling learning limits on a port
About this task
Limit MAC address learning to limit the number of forwarding database (FDB) entries learned on a
particular port to a user-specified value. After the number of learned forwarding database entries
reaches the maximum limit, packets with unknown source MAC addresses are flooded to all
member ports.
Procedure
1. In the Device Physical View tab, select a port or multiple ports.
2. In the navigation tree, expand the following folders: Configuraton > Edit > Port.
3. Click General.
4. Click the Limit-Learning tab.
5. Configure the parameters as required.
Limit-Learning field descriptions
Use the data in the following table to use the Limit-Learning tab.
Name
Description
PortNum Shows the slot and port number to configure.
MaxMacCount Configures the number of entries in the MAC table
for the port that causes learning to stop. The default
is 1024.
CurrentMacCount Shows the number of entries currently in the MAC
table for the port.
Table continues…
Port performance management using EDM
January 2017 Performance Management on Avaya VSP 4000 Series 30
Comments on this document? [e-mail]