Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Variable definitions
Use the data in the following table to use the show pluggable-optical-modules
temperature command.
Table 2: Variable definitions
Variable Value
{slot/port[-slot/port][,...]} Specify a port or a range of ports in the format of slot/port. If you do
not specify a port list, the system displays the complete detailed
output for each port.
Viewing DDI voltage information
Before you begin
• You must log on to at least Privileged EXEC mode in the ACLI.
About this task
Perform this procedure to view SFP and SFP+ voltages.
This command displays information for both DDI and non-DDI SFPs and SFP+s.
Procedure
View SFP and SFP+ voltages:
show pluggable-optical-modules voltage [{slot/port[-slot/port][,...]}]
Example
VSP-4850GTS#show pluggable-optical-modules voltage
================================================================================
Pluggable Optical Module Voltage(V)
================================================================================
PORT LOW_ALARM LOW_WARN ACTUAL HIGH_WARN HIGH_ALARM THRESHOLD
NUM THRESHOLD THRESHOLD VALUE THRESHOLD THRESHOLD STATUS
--------------------------------------------------------------------------------
1/49 3.0350 3.1000 3.2922 3.5000
3.5650 Normal
1/50 3.0350 3.1000 3.2950 3.5000
3.5650 Normal
Variable definitions
Use the data in the following table to use the show pluggable-optical-modules voltage
command.
Viewing DDI voltage information
January 2017 Performance Management on Avaya VSP 4000 Series 27
Comments on this document? [e-mail]