Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

table. The protocol distribution control table is part of this group. The protocol distribution control
table is predefined with an entry for the management IP for the switch to represent the network
segment where the system collects the statistics.
No ACLI or EDM support exists to add or delete entries in this table.
Address map MIB
The address map MIB maps the network layer IP to the MAC layer address.
The system populates the address map control table MIB with an entry for each host interface that
you enable for monitoring on the switch.
Network layer host MIB
The network layer host MIB monitors the Layer 3 traffic statistics for each host. The network layer
host MIB monitors traffic packets in and out of hosts based on the network layer address. The
network layer host controls the network and application layer host tables.
The system populates an entry for the management IP of the switch to represent the network
segment where the system collects the statistics. You have to enable each host interface that you
want to monitor on the switch.
The system only collects statistics for this group from packets that go to the CP.
Application layer host MIB
The application layer host MIB monitors traffic statistics by application protocol for each host.
The system populates an entry for the management IP of the switch to represent the network
segment where the system collects the statistics. You have to enable each host interface that you
want to monitor on the switch.
The system only collects statistics for this group from packets that go to the CP.
Performance management fundamentals
January 2017 Performance Management on Avaya VSP 4000 Series 22
Comments on this document? [e-mail]