Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Category Subcategory Variable Definition
asserted when attempting to
transmit a frame on a particular
MLT. The count represented by an
instance of this object increments
at most once for each transmission
attempt, even if the carrier sense
condition fluctuates during a
transmission attempt.
rcStatMltEtherFrameTooLong A count of frames received on a
particular MLT that exceeds the
maximum permitted frame size.
The count represented by an
instance of this object increments
when the frameTooLong status is
returned by the MAC service to the
LLC (or other MAC user).
rcStatMltEtherMacReceiveError A count of frames for which
reception on a particular MLT fails
due to an internal MAC sublayer
receive error. A frame is only
counted by an instance of this
object if it is not counted by the
corresponding instance of either
the FrameTooLongs object, the
AlignmentErrors object, or the
FCSErrors object.
Other rcTblArNoSpace The number of entries not added to
the address translation table due to
lack of space.
snmpInAsnParseErrs.0 The total number of ASN.1 or BER
errors encountered by the SNMP
protocol entity when it decodes
received SNMP messages.
rcStgPortInBadBpdus The number of bad BPDUs
received by this port.
dot1dTpPortInDiscards Count of valid frames received that
were discarded (that is, filtered) by
the forwarding process.
rip2ifStatRcvBadPackets The number of routes in valid RIP
packets that were ignored for any
reason.
rip2ifStatRcvBadRoutes The number of RIP response
packets received by the RIP
process that were subsequently
discarded for any reason.
Table continues…
January 2017 Performance Management on Avaya VSP 4000 Series 207
Comments on this document? [e-mail]