Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Name Description
that were not counted because they had MAC-layer
errors.
AHDropFrames Shows the total number of frames that the probe
receives and drops but does not include in the
StatsDropEvents value. This event can occur if the
probe is out of resources and sheds the load from
this collection. This value does not include packets
that were not counted because they had MAC-layer
errors.
Owner Shows the entity that configured this entry.
Viewing network host statistics
View network host statistics to see Layer 3 traffic statistics for each host. The network layer host
MIB monitors traffic packets in and out of hosts based on the network layer address.
Procedure
1. In the navigation pane, expand the following folders: Configuration > Serviceability >
RMON.
2. Click Network Layer Host.
3. Click the Network Host Stats tab.
Network Host Stats field descriptions
Use the data in the following table to use the Network Host Stats tab.
Name
Description
LocalIndex Shows a unique identifier for the entry in the table.
HostAddress Shows the host address for this entry.
InPkts Shows the number of packets without errors
transmitted to this address. This value is the number
of link-layer packets so a single, fragmented
network-layer packet can increment the counter
several times.
OutPkts Shows the number of packets without errors
transmitted by this address. This value is the number
of link-layer packets so a single, fragmented
network-layer packet can increment the counter
several times.
Table continues…
RMON configuration using EDM
January 2017 Performance Management on Avaya VSP 4000 Series 182
Comments on this document? [e-mail]