Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Name Description
MatrixConfig Describes and configures the probe support for the
network layer and application layer host tables for
this protocol. The value can be one of the following:
• notSupported
• supportedOff
• supportedOn
Owner Shows the entity that configured this entry.
Viewing the data source for protocol distribution statistics
View the Distribution Control tab to see the network segment data source on which the protocol
distribution statistics are measured. The management IP mentioned as a data source represents the
IP that the SNMP agent uses to access the switch.
Procedure
1. In the navigation pane, expand the following folders: Configuration > Serviceability >
RMON.
2. Click Protocol Distribution.
3. Click the Distribution Control tab.
Distribution Control field descriptions
Use the data in the following table to use the Distribution Control tab.
Name
Description
Index Shows a unique identifier for the entry in the table.
DataSource Specifies the source of data for this protocol
distribution.
DroppedFrames Shows the total number of frames that the probe
receives and drops but does not include in the
StatsDropEvents value. This event can occur if the
probe is out of resources and sheds the load from
this collection. This value does not include packets
that were not counted because they had MAC-layer
errors.
CreateTime Shows the value of the sysUpTime when the entry
was last activated.
Owner Shows the entity that configured this entry.
RMON configuration using EDM
January 2017 Performance Management on Avaya VSP 4000 Series 178
Comments on this document? [e-mail]