Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Parameter Description
• Hypertext Transfer Protocol (HTTP)
• Remote login (RLOGIN)
• Trivial File Transfer Protocol (TFTP)
• Simple Networking Management Protocol (SNMP)
• Hypertext Transfer Protocol Secure (HTTPS)
Displaying RMON network host statistics
View network host statistics to see Layer 3 traffic statistics for each host. The network layer host
MIB monitors traffic packets in and out of hosts based on the network layer address.
Procedure
1. Log on to the switch to enter User EXEC mode.
2. View RMON network host statistics:
show rmon network-host-stats
Job aid
The following table describes the fields in the output for the show rmon network-host-stats
command.
Parameter Description
HOSTADDR Shows the host address for this entry.
INPKT Shows the number of packets without errors transmitted to this address.
This value is the number of link-layer packets so a single, fragmented
network-layer packet can increment the counter several times.
OUTPKT Shows the number of packets without errors transmitted by this address.
This value is the number of link-layer packets so a single, fragmented
network-layer packet can increment the counter several times.
INOCT Shows the number of octets transmitted to this address, excluding octets in
packets that contained errors. This value counts octets in the entire packet
that contained the protocol, not just the particular protocol frames.
OUTOCT Shows the number of octets transmitted by this address, excluding octets in
packets that contained errors. This value counts octets in the entire packet
that contained the protocol, not just the particular protocol frames.
CREATETIME Shows when the entry was last activated.
Displaying RMON information
January 2017 Performance Management on Avaya VSP 4000 Series 163
Comments on this document? [e-mail]