Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Parameter Description
• SUPPORTED ON
If the value is SUPPORTED ON, the probe adds entries to the address map
table that maps the network layer address to the MAC layer address.
AHDROPFRAMES Shows the total number of application layer host frames that the probe
receives and drops. This value does not include packets that were not
counted because they had MAC-layer errors.
CREATETIME Shows when the entry was last activated.
DATASOURCE Shows the source of data for the entry.
DROPFRAMES Shows the total number of frames that the probe receives and drops. This
value does not include packets that were not counted because they had
MAC-layer errors.
HOSTCFG Describes and configures the probe support for the network layer and
application layer host tables for this protocol. The value can be one of the
following:
• NOT SUPPORTED
• SUPPORTED OFF
• SUPPORTED ON
If the value is SUPPORTED ON, the probe adds entries to the Host Control
table to collect statistics for network layer and application layer hosts.
IDX Shows a unique identifier for the entry in the table.
MATRIXCFG Describes and configures the probe support for the network layer and
application layer host tables for this protocol. The value can be one of the
following:
• NOT SUPPORTED
• SUPPORTED OFF
• SUPPORTED ON
NHDROPFRAMES Shows the total number of network host frames that the probe receives and
drops. This value does not include packets that were not counted because
they had MAC-layer errors.
OWNER Shows the entity that configured this entry.
PROTOCOL Shows the protocols RMON2 can monitor:
• Internet Protocol (IP)
• Transmission Control Protocol (TCP)
• User Datagram Protocol (UDP)
• File Transfer Protocol (FTP)
• Secure Shell version 2 (SSHv2)
• Telnet
Table continues…
RMON configuration using ACLI
January 2017 Performance Management on Avaya VSP 4000 Series 162
Comments on this document? [e-mail]