Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Displaying RMON address maps
View the maps of network layer address to physical address to interface.
The probe adds entries based on the source MAC and network addresses in packets without MAC-
level errors.
Procedure
1. Log on to the switch to enter User EXEC mode.
2. View RMON address maps:
show rmon address-map
Example
Switch: show rmon address-map
================================================================================
Rmon Address Map Table
================================================================================
PROTOIDX HOSTADDR SOURCE PHYADDR LASTCHANGE
--------------------------------------------------------------------------------
1 12.1.1.1 2060 b0:ad:aa:42:a5:03 10/09/15 17:30:41
Job aid
The following table describes the fields in the output for the show rmon address-map command.
Parameter Description
PROTOIDX Shows a unique identifier for the entry in the table.
HOSTADDR Shows the network address for this entry. The format of the value depends
on the protocol portion of the local index.
SOURCE Shows the interface or port on which the network address was most recently
seen.
PHYADDR Shows the physical address on which the network address was most
recently seen.
LASTCHANGE Shows when the entry was created or last changed. If this value changes
frequently, it can indicate duplicate address problems.
Displaying RMON application host statistics
View application host statistics to see traffic statistics by application protocol for each host.
Procedure
1. Log on to the switch to enter User EXEC mode.
2. View RMON application host statistics:
show rmon application-host-stats WORD<1–64>
Displaying RMON information
January 2017 Performance Management on Avaya VSP 4000 Series 159
Comments on this document? [e-mail]