Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Name Description
LSP Indicates the number of IS-IS LSP frames seen in this direction
at this level.
CSNP Indicates the number of IS-IS Complete Sequence Number
Packet (CSNP) frames seen in this direction at this level.
PSNP Indicates the number of IS-IS Partial Sequence Number Packets
(PSNPs) seen in this direction at this level.
AbsoluteValue Displays the counter value.
Cumulative Displays the total value since you opened the Stats tab.
Average/Sec Displays the average value for each second.
Minimum/Sec Displays the minimum value for each second.
Maximum/Sec Displays the maximum value for each second.
Last Val/Sec Displays the last value for each second.
Graphing IS-IS interface receiving control packet statistics
Use the following procedure to graph IS-IS interface sending control packet statistics.
Procedure
1. From the navigation tree, choose Configuration > IS-IS.
2. Click IS-IS.
3. Click the Interfaces tab.
4. Select an existing interface.
5. Click the Graph button.
6. Click the Interface Receiving Control Packets tab.
Interface Receiving Control Packets field descriptions
The following table describes the fields in the Interface Receiving Control Packets tab.
Name
Description
Hello Indicates the number of IS-IS Hello PDUs seen in this direction
at this level. Point-to-Point IIH PDUs are counted at the lowest
enabled level: at L1 on L1 or L1L2 circuits, and at L2 otherwise.
LSP Indicates the number of IS-IS link-state packet (LSP) frames
seen in this direction at this level.
CSNP Indicates the number of IS-IS Complete Sequence Number
Packet (CSNP) frames seen in this direction at this level.
PSNP Indicates the number of IS-IS Partial Sequence Number Packets
(PSNPs) seen in this direction at this level.
Table continues…
Viewing statistics using EDM
January 2017 Performance Management on Avaya VSP 4000 Series 149
Comments on this document? [e-mail]