Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Name Description
OutFragFails Shows the number of IPv6 datagrams that have
been discarded because they needed to be
fragmented at this output interface but could not be.
OutFragCreates Shows the number of output datagram fragments
that have been generated as a result of
fragmentation at this output interface.
ReasmReqds Shows the number of IPv6 fragments received which
needed to be reassembled at this interface. This
counter is incremented at the interface to which
these fragments were addressed, which is not
always the input interface for some of the fragments.
ReasmOKs Shows the number of IPv6 datagrams successfully
reassembled. This counter is incremented at the
interface to which these datagrams were addressed,
which is not always the input interface for some of
the fragments.
ReasmFails Shows the number of failures detected by the IPv6
re- assembly algorithm). This value is not necessarily
a count of discarded IPv6 fragments because some
algorithms can lose track of the number of fragments
by combining them as they are received. This
counter is incremented at the interface to which
these fragments were addressed, which is not
always the input interface for some of the fragments.
InMcastPkts Shows the number of multicast packets received by
the interface.
OutMcastPkts Shows the number of multicast packets transmitted
by the interface.
Viewing DHCP statistics for an interface
View DHCP statistics to manage network performance.
Procedure
1. In the navigation tree, expand the following folders: Configuration > IP.
2. Click DHCP Relay.
3. Click the Interfaces Stats tab.
Interfaces Stats field descriptions
Use the data in the following table to use the Interfaces Stats tab.
Viewing statistics using EDM
January 2017 Performance Management on Avaya VSP 4000 Series 107
Comments on this document? [e-mail]