Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Name Description
HCOutPfcPkts Specifies the total number of Priority Flow Control (PFC) packets
transmitted by this interface.
HCInFlowCtrlPkts Specifies the number of flow control packets received by this interface.
HCOutFlowCtrlPkts Specifies the number of flow control packets transmitted by this
interface.
NumStateTransition Specifies the number of times the port went in and out of service; the
number of state transitions from up to down.
Viewing port Ethernet errors statistics
View port Ethernet errors statistics to manage network performance.
Procedure
1. In the Device Physical View, select a port.
2. In the navigation tree, expand the following folders: Configuration > Graph.
3. Click Port.
4. Click the Ethernet Errors tab.
Ethernet Errors field descriptions
The following table describes parameters on the Ethernet Errors tab.
Name
Description
AlignmentErrors Specifies acount of frames received on a particular interface that are
not an integral number of octets in length and do not pass the FCS
check. The count represented by an instance of this object
increments when the alignmentError status is returned by the MAC
service to the LLC (or other MAC user). Received frames for which
multiple error conditions obtain are, according to the conventions of
IEEE 802.3 Layer Management, counted exclusively according to the
error status presented to the LLC.
FCSErrors Specifies a count of frames received on a particular interface that are
an integral number of octets in length but do not pass the FCS check.
The count represented by an instance of this object increments when
the frameCheckError status is returned by the MAC service to the
LLC (or other MAC user). Received frames for which multiple error
conditions obtained are, according to the conventions of IEEE 802.3
Layer Management, counted exclusively according to the error status
presented to the LLC.
InternalMacTransmitErrors Specifies a count of frames for which transmission on a particular
interface fails due to an internal MAC sublayer transmit error. A frame
is only counted by an instance of this object if it is not counted by the
Table continues…
Viewing statistics using EDM
January 2017 Performance Management on Avaya VSP 4000 Series 101
Comments on this document? [e-mail]