Performance Management on Virtual Services Platform 4000 Series Version 5.1.2

Name Description
InOctets Specifies the number of octets received on the interface, including
framing characters.
OutOctets Specifies the number of octets transmitted from the interface, including
framing characters.
InUcastPkts Specifies the number of packets delivered by this sublayer to a higher
sublayer that were not addressed to a multicast or broadcast address
at this sublayer.
OutUcastPkts Specifies the number of packets that higher-level protocols requested
be transmitted that were not addressed to a multicast address at this
sublayer. The total number includes those packets discarded or not
sent.
InMulticastPkts Specifies the number of packets delivered by this sublayer to a higher
sublayer that were addressed to a multicast address at this sublayer.
For a MAC layer protocol, this number includes both group and
functional addresses.
OutMulticastPkts Specifies the number of packets that higher-level protocols requested
be transmitted, and that are addressed to a multicast address at this
sublayer, including those that were discarded or not sent. For a MAC
layer protocol, this number includes both group and functional
addresses.
InBroadcastPkts Specifies the number of packets delivered by this sublayer to a higher
sublayer that are addressed to a broadcast address at this sublayer.
OutBroadcastPkts Specifies the number of packets that higher-level protocols requested
be transmitted, and that were addressed to a broadcast address at this
sublayer, including those that were discarded or not sent.
InDiscards Specifies the number of inbound packets that are discarded because
of frames with errors or invalid frames or, in some cases, to fill up
buffer space.
InErrors For packet-oriented interfaces, specifies the number of inbound
packets that contained errors preventing them from being deliverable
to a higher-layer protocol. For character-oriented or fixed-length
interfaces, the number of inbound transmission units that contained
errors preventing them from being deliverable to a higher-layer
protocol.
InUnknownProtos For packet-oriented interfaces, specifies the number of packets
received through the interface that are discarded because of an
unknown or unsupported protocol. For character-oriented or fixed-
length interfaces that support protocol multiplexing, the number of
transmission units received through the interface that were discarded
because of an unknown or unsupported protocol. For any interface
that does not support protocol multiplexing, this counter is always 0.
HCInPfcPkts Specifies the total number of Priority Flow Control (PFC) packets
received by this interface.
Table continues…
Statistics
January 2017 Performance Management on Avaya VSP 4000 Series 100
Comments on this document? [e-mail]