Installation Instructions

Parameter Specifications
IEEE 10GBASE-ER eye mask margin 10%
Receiver characteristics
Wavelength (requirement) 1450 nm to 1620 nm
Receiver sensitivity (unstressed), OMA – 14.1 dBm, P_OMA
IEEE 10GBASE-ER Stressed Rx Sensitivity – 11.3 dBm, P_OMA
Receiver overload – 1 dBm, P_avg
Receiver reflectance – 26 dB
Receiver damage threshold +4 dBm
10GBASE-LRM SFP+ specifications
The 10GBASE-LRM SFP+ provides 10 GbE service at a wavelength of 1310 nm. This SFP+
can attain a reach of up to 220 m on 62.5 μm multimode fiber. This SFP+ provides built-in
electronic dispersion compensation.
The following table lists the transmitter and receiver specifications for the 10GBASE-LRM SFP
+. These parameters meet the IEEE 802.3aq-2006 standard. The part number of this SFP+ is
AA1403017-E6.
In this table, the OMA, average launch power, and peak power specifications apply at TP2,
after accounting for patch cord loss.
Table 23: IEEE 802.3aq 10GBASE-LRM SFP+ specifications
Parameter
Specifications
Data rate 10.0 Gb/s
Line rate (64B/66B code) 10.3125 Gb/s ± 100 ppm
Center wavelength range 1260 to 1355 nm; 1310 nm nominal
Distance Up to 220 m
Link optical power budget 1.7 to 1.9 dB
Maximum transmitter waveform and
dispersion penalty (TWDP)
4.7 dB
Transmitter characteristics
Average launch power – 6.5 to 0.5 dBm
Peak launch power 3 dBm
Root-mean-square spectral width 2.4 to 4 nm
10GBASE-LRM SFP+ specifications
Installation — SFP and SFP+ transceivers January 2014 63