Installation Instructions

10GBASE-ER CWDM SFP+ specifications
The following table lists the part numbers of the 10GBASE-ER CWDM SFP+ with
corresponding wavelengths. The reach for this SFP+ is up to 40 km.
Table 21: Part number and center wavelength assignment
Part number Center wavelength assignment
AA1403153-E6 1470 nm
AA1403154-E6 1490 nm
AA1403155-E6 1510 nm
AA1403156-E6 1530 nm
AA1403157-E6 1550 nm
AA1403158-E6 1570 nm
AA1403159-E6 1590 nm
AA1403160-E6 1610 nm
The following table lists the transmitter and receiver specifications for the 10GBASE-ER
CWDM SFP+.
Table 22: 10GBASE-ER CWDM SFP+ specifications
Parameter Specifications
Transmitter characteristics
Optical Data Rate (nominal) 9.95 Gb/s to 10.313 Gb/s
Center wavelength Nominal – 6.5 nm to nominal + 6.5 nm
Spectral width (rms at -20 dB) 1 nm
Side Mode Suppression ratio 30 dB
RIN – 128 dB/Hz
Average launched power – 0.2 dBm to 4 dBm
Average launched power, Tx OFF – 30 dBm
Extinction ratio (minimum) 8.2 dB
Tx power, OMA (minimum) + 1.5 dBm
Tx power, OMA-TDP (minimum) – 0.2 dBm
TDP at 800 ps dispersion (maximum) 2.8 dB
SFP+ specifications
62 Installation — SFP and SFP+ transceivers January 2014
Comments? [e-mail]