Installation Instructions

Parameter Specifications
Maximum transmitter and dispersion
penalty
3.9 dB at 300 m
Transmitter characteristics
Root-mean-square spectral width 0.05 to 0.40 nm
Launch power – 7.3 to – 1.0 deciBels referenced to 1 milliwatt
(dBm)
Maximum average launch power of
OFF transmitter
– 30 dBm
Minimum extinction ratio 3.0 dB
Maximum relative intensity noise
12
OMA
– 128 dB per Hertz (dB/Hz)
Maximum optical return loss tolerance – 12 dB
Receiver characteristics
Average receive power for BER 10
-12
– 9.9 to – 1.0 dBm
Maximum average receive power for
damage
0 dBm
Maximum receiver sensitivity in OMA – 11.1 dBm
Maximum receiver reflectance – 12 dB
Stressed receiver sensitivity in OMA – 7.5 dBm
Receiver electrical 3 dB upper cutoff
frequency
12.3 gigaHertz (GHz)
The stressed sensitivity values are for system level BER measurements, which include the
effects of clock and data recovery (CDR) circuits. Avaya recommends that you allocate at least
0.4 dB additional margin if you make component level measurements without the effect of CDR
circuits.
10GBASE-ZR/ZW SFP+ specifications
The following table lists the transmit and receive specifications for the 10GBASE-ZR/ZW SFP
+. The reach for this SFP+ is up to 70 km* at a wavelength of 1550 nm. The part number of
this SFP+ is AA1403016–E6.
Caution:
Risk of BER increase
SFP+ specifications
60 Installation — SFP and SFP+ transceivers January 2014
Comments? [e-mail]