Installation Instructions

Parameter Specifications
Receive electrical 3 dB upper cutoff
frequency (maximum)
12.3 GHz
Examples of an OFF transmitter are as follows: no power supplied to the PDM, laser shutdown
for safety conditions, activation of a PMD_global_transmit_disable or other optional transmitter
shut down conditions.
10GBASE-SR/SW SFP+ specifications
The 10GBASE-SR/SW SFP+ provides 10 GbE service at 850 nm.
The following table lists the specifications for the 10GBASE-SR/SW SFP+. The part number
of this SFP+ is AA1403015-E6.
For more information about the 10GBASE-SR/SW SFP+, including test and measurement
information, see the IEEE 802.3ae standard.
Warning:
Risk of equipment damage
To prevent damage to the optical receiver, ensure that at least 1 dB of attenuation exists
between the transmit and receive ports.
Table 19: IEEE 802.3ae 10GBASE-SR/SW SFP+ specifications
Parameter
Specifications
Data rate 10.0 Gb/s
Line rate (64B/66B code) 10.3125 gigabits per second (Gb/s) ± 100 parts per
million (ppm)
Mean Time Between Failures (MTBF) 675 000 hours
Center wavelength range 840 to 860 nanometers (nm), nominal 850 nm
Distance Using 62.5 µm MMF optic cable:
• 160 MHz-km fiber: 2 to 26 m
• 200 MHz-km fiber: 2 to 33 m
Using 50 µm MMF optic cable:
• 400 MHz-km fiber: 2 to 66 m
• 500 MHz-km fiber: 2 to 82 m
• 2000 MHz-km fiber: 2 to 300 m
Link optical power budget 7.3 dB
10GBASE-SR/SW SFP+ specifications
Installation — SFP and SFP+ transceivers January 2014 59